Some Steps of How to Lay Floor Tiles Professionally

Looking for a home improvement project that you can do yourself? Start with ceramic floor tiles. With these three easy steps, you can make a new look in any room. Not only putting the tiles on the ceramic floor which is easily renovated, but it also gives you a floor surface that is easy to clean. Don't spend time carpet shampoo when you can easily remove ceramic floor tiles.

You can choose the precast epoxy terrazzo treads if you want to renovate your home with beautiful tiles. Make your own display by installing ceramic floor tiles in these easy steps.

Step One – After measuring your room and preparing your floor surface for tile work, spread cement tiles in the ¼ inch layer on the surface of your floor. Leave cement set for 15 minutes, or until tacky with a touch of the finger. Lying before this time will damage cement.

Step Two – Starting from the floor center where the first tile square with the previous line you marked. Remember when putting ceramic floor tiles, if your first tile is wrong, all the others will too. Be sure to put the tile separator between each tile to keep the suitable distance for the NAT needed for laying correctly.

Step three – alternatively on the side of the middle tile and keep putting the tiles of the ceramic floor to the wall. Place your cut tile in the correct position on the wall in the line they have. Continue this step until you finish putting it.

With three easy steps, you have to be successful in the floor tile putting. If for some reason these steps are still intimidating you, there are also other solutions. Floor tiles are now made with adhesives that are already in the back. This eliminates the need for cement and waiting time. This is a tile that you can use immediately. 

You may also like